Team ASV Needs Your HelpPosted: 2014/21/07
The Armored Security vehicle (ASV) sustainment team needs your help. They’re checking on what MWOs have been applied to each M1117 ASV so the Modification Management Information System (MMIS) database can be brought up to date.
The ASV team asks that you physically check for each MWO application, not just the MWO tag, and update the MMIS database. You’ll find MMIS on the LOGSA LIW website:
Here is a list of all ASV MWOs, along with artwork showing each application for quick recognition:
|MWO NUMBER||NOUN||ECP||PROD CUT-IN||LOC||VEHICLES MOD|
|9-2320-307-23-13||Master Battery Disconnect||ASV132||ASV2880||ALL|
|9-2320-307-50-13||Upper Rear Door Torsion Bar||ASV111||ASV2464||PM ASV||ALL|
|9-2320-307-23-18||Seatbelt Retrofit||ASV101||ASV1603||PM ASV||ALL|
|9-2320-307-23-15||Emergency Crew Extraction||ASV093||ASV2464||PM ASV||ALL|
|9-2320-307-23-17||Trans Switch Interlock Ground||ASV087||ASV1272||PM ASV||ALL|
|9-2320-307-40-1||Side Door Torsion Bar Cover||ASV105R1||ASV1898||PM ASV||ALL|
|9-2320-307-23-16||Hydraulic Seat Improvement||ASV066||ASV1048||PM ASV||ALL|
MWO 9-2320-307-23-1 -Variable Slew Rate Controller (VSRC). This can be recognized by the joystick controller used to traverse the turret.
9-2320-307-55-1 – Crew AFES. This is recognized by finding the manual discharge and fire bottles installed on the front left wheel well of the driver’s side of the vehicle.
9-2320-307-23-1 – Master Battery Disconnect Switch. This is recognized by a switch installed on the front of the battery box. The battery box is on the right when entering the driver’s side door.
MWO 9-2320-307-50-13 – Upper Rear Door Torsion Bar. You’ll find this by lifting the rear upper door to the tunnel compartment. If there is an assist device, the MWO has been installed.
MWO 9-2320-307-23-18 – Seatbelt Retrofit. This can be identified by the location of the seatbelt tensioners. New tensioners are mounted at the bottom of the seat as opposed to the top. Also, the new seatbelt manufacturer is Indiana Mills. Seatbelts manufactured by AM-Safe are no longer authorized.
A properly outfitted seatbelt configuration.
MWO 9-2320-307-23-15 – Emergency Crew Extraction. This can be recognized by the sliding bar between the gun port and the handle on the upper side doors. Also, the extraction tool will be mounted on the underside of the winch hatch.
MWO 9-2320-307-23-17 – Transmission Switch Interlock Ground. This can be identified by a proximity switch located on the parking brake pedal support bracket (Item #11).
MWO 9-2320-307-23-16 – Hydraulic Seat Improvement. This is easily identified by the type of seat controller used.
Old Seat Controller
New Seat Controller
Old Skid Plate Configuration
New Skid Plate Configuration
MWO 9-2320-307-23-10 – Rear A/C Panel Modification. Remove the one securing screw to the rear A/C unit and swing it open. Look at the three screws marked as Item #4 below. If they are flat head rather than hex head (as is Item #1), the modification has been completed.
Questions? Contact TACOM’s Kevin Fritz at DSN 786-4945, (586) 282-4945, or by email: